You have no items to compare.
Features
To Remove Mildew Stains with Tilex Mildew Root Penetrator:
Turn nozzle to FOAM position. Spray 6-8 inches from surface until surface is thoroughly covered. Allow foam to deeply penetrate mildew and problem areas. Wipe with a wet sponge or cloth, and rinse. Heavy mildew buildup may require longer contact time or two cleaning. If excess foam dries on nozzle, rinse with warm water.
To Disinfect and Kill Mold and Mildew on Hard, Non-porous Surfaces with Tilex Mildew Root Penetrator:
Spray surface until thoroughly wet; let stand 5 minutes and rinse.
Do not use on wood or painted surface unless you plan to refinish or repaint them. Avoid contact with aluminum, cloths, fabric, carpet or paper surfaces as they will discolor.
Turn nozzle to FOAM position. Spray 6-8 inches from surface until surface is thoroughly covered. Allow foam to deeply penetrate mildew and problem areas. Wipe with a wet sponge or cloth, and rinse. Heavy mildew buildup may require longer contact time or two cleaning. If excess foam dries on nozzle, rinse with warm water.
To Disinfect and Kill Mold and Mildew on Hard, Non-porous Surfaces with Tilex Mildew Root Penetrator:
Spray surface until thoroughly wet; let stand 5 minutes and rinse.
Do not use on wood or painted surface unless you plan to refinish or repaint them. Avoid contact with aluminum, cloths, fabric, carpet or paper surfaces as they will discolor.
Additional Information
| SKU | LACLO00263 |
| Manufacturer | No |
| Application / Use | Remove mildew from grout lines. |
| Dilution(s) | Ready to Use |
| Approvals | No |
| Automatic Discounts | Buy 12 Quarts and Receive 10% Off |
| Packaging | 1 Quart Spray Bottle | 12 Quarts/Case |
| pH | No |
| S.D.S. | No |
| Manufacturer Link(s) |