You have no items to compare.
Features
TeeJet Cap | CP1325 | Spraying Systems Part Number
TeeJet Cap is used to hold the TeeJet to the strainer body, either 1/8 or 1/4 inch. TeeJet will fit snug against the teejet body with or without an inline strainer when this cap is tightened down. TeeJet Caps use straight cut threads that do have a taper so avoid over tightening the teejet cap onto the body as it will damage the threads. TeeJet Caps don't normally leak unless the internal threads are damaged or heavily worn.
TeeJet Cap will work with either Brass or Stainless Steel TeeJets. Inline strainers (see Related Products) are not necessary but are recommended when using TeeJets with an '03' or smaller opening to prevent clogging and wear to a teejet's spray nozzle.
TeeJet Cap is used to hold the TeeJet to the strainer body, either 1/8 or 1/4 inch. TeeJet will fit snug against the teejet body with or without an inline strainer when this cap is tightened down. TeeJet Caps use straight cut threads that do have a taper so avoid over tightening the teejet cap onto the body as it will damage the threads. TeeJet Caps don't normally leak unless the internal threads are damaged or heavily worn.
TeeJet Cap will work with either Brass or Stainless Steel TeeJets. Inline strainers (see Related Products) are not necessary but are recommended when using TeeJets with an '03' or smaller opening to prevent clogging and wear to a teejet's spray nozzle.
Additional Information
| SKU | SB973P |
| Manufacturer | Spraying Systems |
| Manufacturer Link(s) |
You may also be interested in the following product(s)
|
Stainless Steel TeeJet | 9505
$10.12
|
Stainless Steel TeeJet | 9506
$10.12
|
Stainless Steel TeeJet | 8001
$10.12
|
Stainless Steel TeeJet | 80015
$10.12
|
