Skunk Odor Control

• It is the number one product against skunk odor and other difficult odors such as cat urine.
• Skunk Odor Control is an effective water-based odor counteractant.
• This concentrate is designed to be diluted with water and then applied by wet fogging or spraying the affected areas.
• Works on contact.
• For use on all water-safe surfaces: carpet, upholstery, fabric, vinyl, concrete, sealed wood, tile, grout, animal cages, trash cans, etc.

Urine or Skunk Decontamination:
Remove excess soil, waste matter, animal carcass, etc. Mix 1 part Skunk Odor Control with 10 parts water. Located contaminated areas with a black light or moisture detector. Apply by sprayer or wet fogger directly to the contaminated area. Allow 10-20 minutes dwell time. Clean textiles using the hot water extraction method.

Urine Decontamination on Oriental Rugs:
Pre-qualify with customer, urine may cause dye bleed, yellowing, or fiber damage. Dry vacuum to remove damaging particulate prior to wetting. Wet down run with plain water in a wash pit where the rug can lie flat. Mix 1 quart of Skunk Odor Control in 5 gallons of water for a 9 x 12 pile rug (adjust quantity for size of rug--approximately 1 quart Skunk Odor Control per 100 sq. ft. of rug). Pour about 1/3 of the mixture on the rug back and shampoo in. Flip the rug and pour the rest on the front and shampoo in. Add water so the rug is covered by 3-4 inches of water. Use a roller to begin to loosen the urine. Roll the face once and let the rug soak for an hour. Roll again and let soak for a second hour. Poll after 3 hours and at this time you can wash most rugs. Do a final flush on the rug and roll while water is running over the rug. It should rinse clear at this point and can be put through your rug washing process.

Note: DO NOT SPRAY OR FOG ON STAINED WOOD AND METAL SURFACES. DAMAGE TO SURFACES MAY RESULT.