You have no items to compare.
Features
ShockWave RTU is a powerful ready-to-use quaternary ammonium chloride blend, which is ideal for use when clean water is not readily available or for any situation where a ready-to-use formula is required.
Note to Builders/General Contractors: ShockWave RTU contributes toward satisfying IEQ Credit 3.3 under LEEDEB by complying with “California Code of Regulations maximum allowable VOC levels for disinfectants”.
Water Damage Restoration: This product is particularly suitable for use in water damage restoration situations to sanitize against odor causing bacteria on the following porous and semi-porous materials: carpets, carpet cushion, subfloors, drywall, trim and frame lumber, tackless strip and paneling. Use as supplied, saturate affected materials with enough product to remain wet for at least 10 minutes. Use proper ventilation and PPE.
Disinfect/Clean/Deodorize: Preclean all heavily soiled surfaces prior to product application. To clean, deodorize, and disinfect apply product with a cloth, sponge or other suitable applicator until surface is thoroughly wet. Wait 10 minutes, and wipe dry or air dry. Do not use on glasses, dishes or utensils.
Fungicidal: Kills Trichophyton mentagrophytes on hard nonporous surfaces. Spray solution making sure to wet all surfaces completely. Wait 10 minutes, then remove excess liquid or allow to air dry.
Deodorizer: This product deodorizes garbage storage areas, empty garbage bins and cans, exterior surfaces of toilet bowls and any other odor-causing areas. Spray solution making sure to wet all surfaces completely. Allow to air dry.
Note to Builders/General Contractors: ShockWave RTU contributes toward satisfying IEQ Credit 3.3 under LEEDEB by complying with “California Code of Regulations maximum allowable VOC levels for disinfectants”.
Water Damage Restoration: This product is particularly suitable for use in water damage restoration situations to sanitize against odor causing bacteria on the following porous and semi-porous materials: carpets, carpet cushion, subfloors, drywall, trim and frame lumber, tackless strip and paneling. Use as supplied, saturate affected materials with enough product to remain wet for at least 10 minutes. Use proper ventilation and PPE.
Disinfect/Clean/Deodorize: Preclean all heavily soiled surfaces prior to product application. To clean, deodorize, and disinfect apply product with a cloth, sponge or other suitable applicator until surface is thoroughly wet. Wait 10 minutes, and wipe dry or air dry. Do not use on glasses, dishes or utensils.
Fungicidal: Kills Trichophyton mentagrophytes on hard nonporous surfaces. Spray solution making sure to wet all surfaces completely. Wait 10 minutes, then remove excess liquid or allow to air dry.
Deodorizer: This product deodorizes garbage storage areas, empty garbage bins and cans, exterior surfaces of toilet bowls and any other odor-causing areas. Spray solution making sure to wet all surfaces completely. Allow to air dry.
Additional Information
| SKU | FI8316-1-C4-GROUP |
| Manufacturer | Fiberlock |
| Application / Use |
Ready to Use formula Hospital Grade Disinfectant and sanitizing cleaner for hard, non-porous and porous surfaces Product Data Sheet - Left Click to view .PDF | Right Click and Save Link As to Download .PDF |
| Dilution(s) | Ready to Use - DO NOT DILUTE |
| Approvals | EPA Registered NO. 61178-2-73884 |
| Automatic Discounts | Buy 4 Gallons and Receive 10% Off |
| Packaging | 1 Gallons | 4 Gallons |
| pH | 10.5 - 11.0 |
| S.D.S. | Left Click to view .PDF | Right Click and Save Link As to Download .PDF |
| Manufacturer Link(s) |
