You have no items to compare.
Features
ShockWave Hydrogen Peroxide Disinfectant and Cleaner’s non-dulling formula eliminates the time and labor normally required for rinsing. It is designed for use on hard, non-porous environmental surfaces listed on this label made from: vinyl, Naugahyde, painted surfaces, plastic, glazed ceramic, glazed porcelain, chrome, stainless steel, aluminum, laminated surfaces and baked enamel surfaces associated with floors, walls, ceilings, tables, chairs, countertops, telephones, glazed tile, sinks.
For Use in Health Care, Dental, Life Science Laboratory, Medical, Industrial & Institutional Facilities, and Hospitals. Shockwave Hydrogen Peroxide Disinfectant and Cleaner is an effective cleaner disinfectant sanitizer on non-food contact surfaces.
DIRECTIONS FOR USE: It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. This product is not to be used as a terminal sterilant/high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the blood stream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to preclean or decontaminate critical or semi-critical medical devices prior to sterilization or high level disinfection.
For use as a cleaner and/or deodorizer: Apply to surfaces by spray, cloth, sponge, or mop. Wipe surfaces dry or rinse.
For use as a one-step cleaner/disinfectant product:
1. Pre-clean heavily soiled areas.
2. Apply solution by spray, cloth, disposable wipe or mop to hard, non-porous environmental surfaces.
3. All surfaces must remain wet for 1 minute. Use a 5 minute contact time for TB and a 10 minute contact for fungi.
4. Wipe surfaces dry or rinse.
To kill Fungi: Pre-clean heavily soiled areas. Apply ShockWave Hydrogen Peroxide Disinfectant and Cleaner with a cloth, microfiber cloth, sponge, mop or trigger sprayer to completely wet surface. Allow the surface to remain wet for 10 minutes. Wipe surfaces dry or allow to air dry.
Broad Spectrum Non-food contact sanitizer: Apply to hard non-porous surface; allow to remain wet for 30 seconds. Wipe dry. No rinsing is required. For heavily soiled areas a pre-cleaning is required.
For use to clean and disinfect life science laboratory surfaces, instruments, and glassware:
1. Pre-clean heavily soiled areas.
2. Apply solution by spray, cloth, disposable wipe or mop to hard, non-porous environmental surfaces or completely immerse pre-cleaned glassware and compatible instruments in the solution.
3. Immerse or allow the surface to remain wet for 1 minute. Use a 5 minute contact time for TB and a 10 minute contact for fungi.
4. For glassware/instrument: Rinse surface thoroughly and let air dry before reuse. For surfaces: Wipe surface dry or rinse.
5. Change immersion solution after each use.
*KILLS HIV, HCV and HBV ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS in health care settings (Hospitals, Nursing Homes) and other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood/body fluids, and in which the surfaces/objects likely to be soiled with blood/body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1) (associated with AIDS), Hepatitis C Virus (HCV) or Hepatitis B Virus (HBV).
SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1 (AIDS Virus), HCV OR HBV OF SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUIDS.
Personal Protection: Disposable latex or vinyl gloves, gowns, face masks, or eye coverings as appropriate, must be worn during all cleaning of body fluids, blood, and decontamination procedures.
Cleaning Procedures: Blood/body fluids must be thoroughly cleaned from surfaces/objects before application of ShockWave Hydrogen Peroxide Disinfectant and Cleaner.
Contact Time: Allow surface to remain wet for 1 minute to kill HIV-1, HCV and HBV. Use a 5 minute contact time for TB and a 10 minute contact for fungi.
Disposal of Infectious Material: Blood/body fluids should be autoclaved and disposed of according to Federal, State, and local regulations for infectious waste disposal.
For Use in Health Care, Dental, Life Science Laboratory, Medical, Industrial & Institutional Facilities, and Hospitals. Shockwave Hydrogen Peroxide Disinfectant and Cleaner is an effective cleaner disinfectant sanitizer on non-food contact surfaces.
DIRECTIONS FOR USE: It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. This product is not to be used as a terminal sterilant/high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the blood stream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to preclean or decontaminate critical or semi-critical medical devices prior to sterilization or high level disinfection.
For use as a cleaner and/or deodorizer: Apply to surfaces by spray, cloth, sponge, or mop. Wipe surfaces dry or rinse.
For use as a one-step cleaner/disinfectant product:
1. Pre-clean heavily soiled areas.
2. Apply solution by spray, cloth, disposable wipe or mop to hard, non-porous environmental surfaces.
3. All surfaces must remain wet for 1 minute. Use a 5 minute contact time for TB and a 10 minute contact for fungi.
4. Wipe surfaces dry or rinse.
To kill Fungi: Pre-clean heavily soiled areas. Apply ShockWave Hydrogen Peroxide Disinfectant and Cleaner with a cloth, microfiber cloth, sponge, mop or trigger sprayer to completely wet surface. Allow the surface to remain wet for 10 minutes. Wipe surfaces dry or allow to air dry.
Broad Spectrum Non-food contact sanitizer: Apply to hard non-porous surface; allow to remain wet for 30 seconds. Wipe dry. No rinsing is required. For heavily soiled areas a pre-cleaning is required.
For use to clean and disinfect life science laboratory surfaces, instruments, and glassware:
1. Pre-clean heavily soiled areas.
2. Apply solution by spray, cloth, disposable wipe or mop to hard, non-porous environmental surfaces or completely immerse pre-cleaned glassware and compatible instruments in the solution.
3. Immerse or allow the surface to remain wet for 1 minute. Use a 5 minute contact time for TB and a 10 minute contact for fungi.
4. For glassware/instrument: Rinse surface thoroughly and let air dry before reuse. For surfaces: Wipe surface dry or rinse.
5. Change immersion solution after each use.
*KILLS HIV, HCV and HBV ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS in health care settings (Hospitals, Nursing Homes) and other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood/body fluids, and in which the surfaces/objects likely to be soiled with blood/body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1) (associated with AIDS), Hepatitis C Virus (HCV) or Hepatitis B Virus (HBV).
SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1 (AIDS Virus), HCV OR HBV OF SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUIDS.
Personal Protection: Disposable latex or vinyl gloves, gowns, face masks, or eye coverings as appropriate, must be worn during all cleaning of body fluids, blood, and decontamination procedures.
Cleaning Procedures: Blood/body fluids must be thoroughly cleaned from surfaces/objects before application of ShockWave Hydrogen Peroxide Disinfectant and Cleaner.
Contact Time: Allow surface to remain wet for 1 minute to kill HIV-1, HCV and HBV. Use a 5 minute contact time for TB and a 10 minute contact for fungi.
Disposal of Infectious Material: Blood/body fluids should be autoclaved and disposed of according to Federal, State, and local regulations for infectious waste disposal.
Additional Information
| SKU | FI8318-1-C4-GROUP |
| Manufacturer | Fiberlock |
| Application / Use |
Hydrogen Peroxide based disinfectant and cleaner for disinfecting and cleaning of hard, non-porous environmental surfaces. Product Data Sheet - Left Click to view .PDF | Right Click and Save Link As to Download .PDF |
| Dilution(s) | Ready to Use - DO NOT DILUTE |
| Approvals | EPA REG. No. 74559-1-73884 |
| Automatic Discounts | Buy 4 Gallons and Receive 10% Off |
| Packaging | 1 Gallons | 4 Gallons/Case |
| pH | No |
| S.D.S. | Left Click to view .PDF | Right Click and Save Link As to Download .PDF |
| Manufacturer Link(s) |
You may also be interested in the following product(s)
|
Microban X-590
$57.61
|
Microban Disinfectant Spray Plus
Starting at: $40.37
|
Microban Botaniclean
$32.66
|
Serum 1000
Starting at: $15.74
|
