You have no items to compare.
Features
Impact Cleaner contains no VOCs, EDTA/NTA, optical brighteners, fragrances, dyes, phosphates, alkyl/nonyl phenols or other hazardous or unnecessary ingredients. It delivers high visually clean fabrics with low environmental impact. Impact Cleaner will not contribute to resoiling or color change.
Carpet Prespray:
1. Mix 6 ounces of Impact per 1 gallon of hot water. Apply to carpet with a pump style sprayer. Light agitation of carpet with a carpet brush will increase cleaning efficiency. let sit for 5 minutes before extracting.
2. Fill the extraction machine's reservoir with hot tap water.
3. Maximize the amount of water removed from the carpet by making water extraction pass with the water spray on and then again with the spray off and the vacuum on. Test the carpet with your hand to see if it is wet or damp. If significant moisture remains, repeat extraction drying passes until fabrics are damp to the touch.
4. Post vacuum after carpet is completely dry to optimize the cleaning process.
In-Tank Carpet Extraction:
1. Mix 3 ounces of Impact with 1 gallon of hot water.
2. Fill solution tank and extraction clean following proper cleaning techniques
3. Maximize the amount of water removed from the carpet by making water extraction pass with the water spray on and then again with the spray off and the vacuum on. Test the carpet with your hand to see if it is wet or damp. If significant moisture remains, repeat extraction drying passes until fabrics are damp to the touch.
4. Post vacuum after carpet is completely dry to optimize the cleaning process.
Suggested Dilution Ratios For HydroForce Sprayers:
As a pre-spray, use the dilution ratio of 1:20.
• For the Yellow Tip, set the liters of concentration to 2.04
• For the White Tip set the liters of concentration to 3.85
As general purpose cleaning, use the dilution ratio of 1:32
• For the Yellow Tip, set the liters of concentration to 1.30
• For the White Tip set the liters of concentration to 2.45
• For the Brown Tip set the liters of concentration to NEAT
Carpet Prespray:
1. Mix 6 ounces of Impact per 1 gallon of hot water. Apply to carpet with a pump style sprayer. Light agitation of carpet with a carpet brush will increase cleaning efficiency. let sit for 5 minutes before extracting.
2. Fill the extraction machine's reservoir with hot tap water.
3. Maximize the amount of water removed from the carpet by making water extraction pass with the water spray on and then again with the spray off and the vacuum on. Test the carpet with your hand to see if it is wet or damp. If significant moisture remains, repeat extraction drying passes until fabrics are damp to the touch.
4. Post vacuum after carpet is completely dry to optimize the cleaning process.
In-Tank Carpet Extraction:
1. Mix 3 ounces of Impact with 1 gallon of hot water.
2. Fill solution tank and extraction clean following proper cleaning techniques
3. Maximize the amount of water removed from the carpet by making water extraction pass with the water spray on and then again with the spray off and the vacuum on. Test the carpet with your hand to see if it is wet or damp. If significant moisture remains, repeat extraction drying passes until fabrics are damp to the touch.
4. Post vacuum after carpet is completely dry to optimize the cleaning process.
Suggested Dilution Ratios For HydroForce Sprayers:
As a pre-spray, use the dilution ratio of 1:20.
• For the Yellow Tip, set the liters of concentration to 2.04
• For the White Tip set the liters of concentration to 3.85
As general purpose cleaning, use the dilution ratio of 1:32
• For the Yellow Tip, set the liters of concentration to 1.30
• For the White Tip set the liters of concentration to 2.45
• For the Brown Tip set the liters of concentration to NEAT
Additional Information
| SKU | BE60475 |
| Manufacturer | Benefect |
| Application / Use | High performance Carpet Cleaner Concentrate formulated for carpets, upholstery, and most fabrics |
| Dilution(s) | Mix 6oz. per gallon of water |
| Approvals | Environmental Protection Agency | CRI Seal of Approval |
| Automatic Discounts | Buy 4 Gallons and Receive 10% off! |
| Packaging | 1 Gallon | 4 Gallons/Case |
| pH | @ Ready to Use: 9.7 |
| S.D.S. | Left Click to view .PDF | Right Click and Save Link As to Download .PDF |
| Manufacturer Link(s) |
Benefect | Data Sheet |